The relationship between light intensity and nutrient uptake kinetics in six freshwater diatoms

In order to find effective measures to control diatom blooms, a better understanding of the physiological characteristics of nutrient uptake in diatoms is needed. A study of P and Si-uptake kinetics for diatom species from two light regimes was conducted at low (LL), moderate (ML) and high light intensities (HL) (2, 25 and 80 μmol photons/(m²·sec)), respectively. The results showed that P uptake of diatoms was heavily influenced by historic light regimes. P affinity changed with growth and photosynthetic activity. The lowest half saturation constant for P uptake (K_m(P)) was under HL for high-light adapted diatoms while the lowest half-saturation constant for low-light adapted diatoms was observed under LL. The Si half-saturation constant (K_m(Si)) increased with increasing light intensities for pennate diatoms but decreased for centric diatoms. Diatom volumes were correlated with the maximum Si uptake rates (V_m(Si)) at HL and K_m(Si) at ML and HL for six diatom species. Our results imply that when we assess the development of diatom blooms we should consider light intensity and cell volume in addition to ambient Si or P concentration. The relationship between light intensity and P-uptake suggests that we can find suitable methods to control diatom blooms on the basis of reducing phytoplankton activity of P-uptake and photosynthesis simultaneously.     

Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs(phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration(sum of the gas phase and the particulate phase) was4748.24 ng/m3, ranging between 3070.09 and 6700.14 ng/m3. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the ∑ 6PAEs. Dividing the particulate-phase PAEs into four size ranges( 2.5, 2.5–5, 5–10, 10 μm), the result indicated that PAEs in PM2.5were the most abundant,with the proportion of 72.64%. In addition, the PAE concentration in PM2.5correlated significantly with the total particulate-phase PAEs(R2= 0.85). Thus, the amount of PAEs in PM2.5can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Pollution levels and characteristics of phthalate esters in indoor air in hospitals

The concentrations of phthalate esters(PAEs) in Chinese hospitals were investigated by simultaneously determining concentrations of gas- and particle-phase PAEs. PAEs were detected in two third-class first-grade hospitals, two second-class first-grade hospitals, and a community health service center. Hospital drugstores had the highest concentration(24.19 μg/m3), which was 1.54 times that of newly decorated houses. The second highest concentration was found in the transfusion rooms, averaging 21.89 μg/m3; this was followed by the concentrations of PAEs in the nurse's workstations, the wards, and the doctor's offices, with mean concentrations of 20.66, 20.0, and 16.92 μg/m3, respectively. The lowest concentrations were found in the hallways(16.30 μg/m3). Of the six different kinds of PAEs found, major pollutants included diethyl phthalates, dibutyl phthalates, butylbenzyl phthalates and di(2-ethylhexyl) phthalates, comprising more than 80% of all PAEs present.Meanwhile, a comparison between different wards showed that PAE concentrations in the maternity wards were 1.63 times higher than in the main wards. Based on known health hazards, our results suggest that the PAEs seriously influence the health of the pregnant women and babies; therefore, it is of great importance to take the phthalate concentrations in hospitals into consideration. In addition, hospital indoor air was more seriously contaminated than the air of newly decorated houses.     

Environmental behaviors of phoxim with two formulations in bamboo forest under soil surface mulching

Phoxim (emulsifiable concentrate (EC) and granules (G)) has been widely used in bamboo forests. The persistence and magnitude of phoxim residues in the crop and soil must be investigated to ensure human and environmental safety. The environmental behaviors of the two formulations were investigated in a bamboo forest under soil surface mulching conditions (CP) and non-covered cultivation conditions (NCP). The half-lives of phoxim in soil under the two conditions in soil were 4.1–6.2 days (EC) and 31.5–49.5 days (G), respectively. Phoxim in EC could be leached from the topsoil into the subsoil. A minimized leaching effect was observed for G under NCP. Inversely, an enhanced leaching effect was observed for G under CP. The G formulation resulted in more parent compound (in bamboo shoots) and metabolite (in soil) residues of phoxim than in the case of EC, especially under CP conditions. In addition, the intensity and duration of the formulation effect on soil pH adjustment from G were more obvious than that from EC. Results showed that the environmental behaviors (distribution, degradation, residue) of phoxim in the bamboo forest were significantly influenced by the type of formulation. The prolongation effect from phoxim G might cause persistence and long-term environmental risk. However, bamboo shoot consumption could be considered relatively safe after applying the recommended dose of the two phoxim formulations.     

2014年-2020年江苏省城镇化的边际资源环境影响预测分析研究

利用历史数据,选取合适计算模型,定量预测了2014年-2020年江苏省城镇化边际资源环境影响,即以与城镇化发展密切相关的资源使用量或者城镇生活污染物排放量较上一年的增量,除以当年城镇化率增量,得到江苏省城镇化水平每提高一个百分点带来的资源环境影响,以期为江苏环境管理及政府综合决策提供切实有效的数据依据.结果表明:未来7年,江苏省城镇化率每上升1个百分点,增加城镇生活用水量约0.5亿立方米、城镇建设用地面积16万亩;增加城镇生活污水排放量1.15亿吨、生活氮氧化物排放量10 228吨、生活垃圾产生量36.4万吨;减少生活COD排放量7 549吨、生活氨氮排放量762吨、生活二氧化硫(SO2)排放量371吨.     

呼和浩特市可镇污水处理厂工程设计

呼和浩特市可镇污水处理厂近期建设规模1.0×104m3/d,远期总规模2.5×104m3/d。污水处理主体工艺采用组合式A2/O生化池+砂滤,污泥处理采用污泥贮池+带式浓缩脱水一体机,尾水采用液氯消毒,设计出水水质执行GB 18918—2002《城镇污水处理厂污染物排放标准》一级A排放标准。介绍了该工程的工艺流程、设计参数,总结分析了工艺设计的技术特点。同时阐述了针对低温条件下的运行保障措施和要求,为寒冷地区同类污水处理厂的设计提供参考和借鉴。     

中国PM2.5管理策略研究

文章通过对PM2.5的基本组成、来源与影响因素的分析,构建中国PM2.5全过程管理体系,建立、完善PM2.5削减和控制长效机制,进而实现中国PM2.5管理。     

废弃SCR脱硝催化剂的再生及其脱硝性能研究

对废弃脱硝催化剂处理后重新加工再生,研究了添加剂对其粉体成型和再生催化剂脱硝活性的影响,探讨了反应温度、空速、n(NH3)∶n(NO)摩尔比、氧含量、H2O和SO2对再生催化剂NH3选择性催化还原(SCR)NO的影响。结果表明:最佳再生条件是使用5%羧甲基纤维素和10%无机粘结剂辅助成型;废弃催化剂再生利用率高达90%;再生催化剂抗压强度为4.73 MPa,优于商用催化剂;空速5 000 h-1、氨氮摩尔比1、氧含量6%时,脱硝活性温度窗口为310⁴50℃,350℃时活性最高为94%;350℃时,单独通入1 000×10-6SO2或10%H2O对再生催化剂活性均有一定抑制作用,最低活性分别为70%和81%,停止通入SO2或H2O后其活性逐渐恢复;同时通入1 000×10-6SO2和10%H2O,再生催化剂活性下降至63%并于1 h内保持相对稳定,停止通入SO2和H2O 2 h后,活性逐渐恢复到73%。     

膜生物反应器处理垃圾渗滤液研究综述

传统生物处理工艺对垃圾渗滤液,特别是老龄化垃圾渗滤液处理效果差,而膜生物反应器(MBR)在这方面显现出巨大优势。MBR通过截留微生物保持高生物量浓度,只需较短的水力停留时间,并可承受较大有机负荷率,能有效去除有机物及微污染物,对氨氮的去除率达90%以上。优化条件下,对老龄垃圾渗滤液中COD的去除率达75%以上。虽然MBR性能稳定,但较短的水力停留时间和高浓度的氨氮对反应器有不良影响,并且较大的污泥龄也会降低反应器的性能。然而厌氧MBR和改进型活性炭粉末MBR在垃圾渗滤液的治理中表现出了巨大的潜力。     

天然和CPB改性沸石对Hg^2＋的吸附特征

通过静态实验研究溴代十六烷基吡啶（CPB）改性沸石和天然沸石对废水中Hg^2＋的吸附特性，探讨了吸附动力学、吸附平衡和吸附热力学机制。研究表明：Langmuir方程能较好地描述2种沸石对Hg^2＋的吸附，CPB改性沸石对Hg^2＋的吸附率得到显著提高。实验条件下，改性沸石对Hg^2＋的吸附率从67．5％提高到98．9％，吸附容量从0．521mg／g提高到3．07mg／g。利用准一级动力学方程、假二级动力学方程、颗粒内扩散模型和Elovich方程分别对动力学过程进行拟合，发现2种沸石对Hg^2＋的吸附均满足假二级动力学方程，且离子的颗粒内扩散对整个吸附过程有影响。动力学拟合、D-R方程拟合和热力学研究综合表明：2种沸石对Hg^2＋的吸附既存在化学吸附又存在物理吸附，吸附吉布斯自由能变（△G^0）、焓变（△H^0）、熵变（△S^0）均小于0，反应为自发的放热反应，低温有利于吸附的进行。